How to Sew a Felt Holly Napkin Ring with a Hidden Elastic Loop

hand sewn dark green felt holly leaves and three red felt berries embellishing an ivory folded napkin with concealed elastic loop, Christmas table

A felt holly napkin ring brings two green leaves and three red berries to a holiday place setting. The elastic loop sits out of sight under the sprig.

Use green and red craft felt and a short length of soft elastic. The colors suit Christmas table settings and stand out against a plain cloth napkin.

Cut the pieces, sew the detail by hand, and fit the band to one folded napkin before making a set. Choose felt shades that echo your large Christmas bows.


Materials and Tools

Green and red felt shapes, narrow elastic and thread

Gather the supplies for one ring and fold a napkin for the fitting.

  1. Green felt – Two scraps about 2½ × 1¼ inches for the leaves.
  2. Red felt – A scrap for three circles about ⅜ inch across.
  3. Soft flat elastic – Use ¼-inch-wide elastic and allow ½ inch for overlap.
  4. Green felt scrap – Cut a small tab to cover the elastic join.
  5. Hand-sewing needle and thread – Select green and red thread to match the felt.
  6. Paper, scissors and pencil – Use them to make templates and cut the felt.

Precautions Before You Begin

Check the tools and how the finished piece will be used before starting.

  • Keep loose needles and small felt pieces away from young children and pets.
  • Fit the elastic around one folded napkin before sewing a full set.
  • Keep felt and cloth napkins away from open flames.

1. Cut Two Leaves and Three Berries

Cutting a pointed felt holly leaf from dark green felt

  1. Trace the leaves. Draw a pointed leaf about 2½ inches long with a flat base. Trace and cut two green felt copies.
  2. Cut the berries. Cut three red felt circles about ⅜ inch wide. Set them over the leaves to check that the tips will remain visible.

2. Overlap and Stitch the Leaf Bases

Holding two green felt holly leaves by their overlapping bases

  1. Arrange the leaves. Angle the leaves with about ½ inch of overlap at the bases. Hold them against the napkin to check their proportions.
  2. Stitch the join. Sew through both layers with several short stitches in matching thread. Keep the stitches where berries will cover them.

3. Sew on the Red Felt Berries

Sewing red felt berries at the base of two green holly leaves

  1. Position the circles. Arrange the red felt in a small triangle above the leaf join. Sew each berry to the felt below it.
  2. Check the edges. Tie the thread off on the back. Gently lift the sprig and check that all three circles lie flat.

4. Fit and Conceal the Elastic Loop

Back of a felt holly sprig showing a small tab and elastic loop

  1. Make the band. Fit the elastic around your folded napkin with a little give. Add ½ inch of overlap, trim, and join the ends with several firm stitches.
  2. Secure the band behind the holly. Cover the join with a small felt tab. Sew the tab to the leaves through the overlap so the rest of the loop stays free.

5. Slide the Holly onto the Napkin

Finished felt holly sprig worn on a folded white napkin

  1. Check the fit. Slide the loop over the folded napkin. Turn the holly to face up and adjust the band if it squeezes the cloth.
  2. Use the first ring as a pattern. Check a second napkin before cutting more elastic. Keep the leaf template and the loop measurement together.

How to Store and Care for Felt Holly Rings

Store the rings flat in a dry box. Lift crumbs with a soft brush and remove the ring before laundering the napkin. If the elastic stretches out, unpick the felt tab and use the finished length of a ring that still fits as the pattern for a replacement.


Troubleshooting the Holly Napkin Ring

If the sprig rolls sideways, check that the join sits behind the center of both leaves. If stitches show on the front, place them under the berries when you resew them. If the napkin bunches, cut the next elastic band slightly longer.


More Details for a Handmade Holiday Table

Set one finished napkin ring beside your everyday plates before cutting felt for the whole table. That gives you a chance to see whether the berries still stand out against the napkin and whether the sprig fits comfortably beside the flatware. The projects below can help carry a leaf shape, a ribbon color, or a natural texture into the rest of the setting.

How would you pair your holly ring with the napkins you already own? Share the felt and napkin colors in the comments. If you’ve sewn a sample, tell us whether you adjusted the elastic for a thicker or thinner fold.

 

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.