18 Plastic Bottle LED Candle Holders You Can Make

Three upcycled plastic bottle lanterns with battery LED tealights and decorative cutouts

A plastic bottle can soften the light from a battery-powered LED and give you a surface to decorate. The shape of the bottle changes the effect, from a low glow in a shallow cup to a tall lantern with colored sides.

Use only battery-powered LED tealights or cool-running battery string lights. Have an adult make and smooth the cuts. Compare the effects of clear and colored glass in these bottle string light ideas.

Start with a bottle you can easily open to reach the light switch. Save clean offcuts from the holder for other plastic bottle projects.


1. Blue Tissue Paper Lantern With Stars

Blue Tissue Paper Lantern With Stars
Photo via Wesco

Cover a smooth bottle section with thin blue tissue paper and leave spaces for contrasting stars. Glue the lightest pieces where you want the light to shine through most clearly. Set the LED on a level base inside and try it before adding another layer. Tissue overlaps tend to look darker once the light is on.


2. White Lantern With Moon and Star Cutouts

White Lantern With Moon and Star Cutouts
Photo via YouTube project tutorial

Wrap a bottle in paper with cutouts that let the light through. Cut the stars and crescents from the paper while it is flat, then wrap it around the plastic. Leave a little space between the shapes so the paper keeps its shape, and slip a warm LED into the base for a soft glow.


3. Gold Frame Around a White Bottle Lantern

Gold Frame Around a White Bottle Lantern
Photo via YouTube project tutorial

Use the lower section of a clear bottle as a window and give the upper section a dome shape. Add slim gold strips to suggest a lantern frame. Plan the access opening before adding the strips so the LED can be lifted out to change its batteries. Keep the decorative loop clear of the switch opening.


4. Frosted Bottle With a Warm String of Lights

Frosted Bottle With a Warm String of Lights
Photo via Hometalk

A frosted bottle softens each point of light and spreads the glow across the plastic. Feed a short battery-powered LED strand inside and keep the control box where you can reach it. For a pair, choose one short bottle and one tall bottle. Leave both plain if you want the frosted texture to stand out.


5. White Bottle Petals Around an LED

White Bottle Petals Around an LED
Photo via Original Etsy listing

Shape wide white petals from pieces of a bottle, using a large paper template so each one looks similar. Arrange the petals around a flat base with room in the middle for an LED light. Angle them slightly upward to catch some of the glow and keep their ends away from the access opening.


6. Green Bottle Lantern With a Carry Loop

Green Bottle Lantern With a Carry Loop
Photo via YouTube project tutorial

Use the green top and bottom from a bottle to frame a clear middle. Keep the plastic edges smooth wherever they meet so the pieces can sit together without buckling. Add a light decorative loop to the neck. Set the lantern on a shelf or a table while it’s lit so the LED stays in place.


7. Polka-Dot Pumpkin Bottle Lanterns

Polka-Dot Pumpkin Bottle Lanterns
Photo via Nijiiro Kobo (via LINE News)

Give two short bottle sections a coat of orange paint and decorate them with dots. The pumpkin shape is easiest to see when the stem is short and curved. For a brighter effect, leave small openings in the paper or paint. Switch the LED on as you work to see which parts throw the most light.


8. Red-Roof Bottle Lantern Cluster

Red-Roof Bottle Lantern Cluster
Photo via TV Azteca

Pair a clear bottle base with a red painted top so the lower half can glow. Repeat the shape in three sizes and group the smallest one toward the front. Vary the height by choosing bottles with different shoulders. Keep the base level and use a removable LED in each lantern so the lights can switch off independently.


9. Cut-Paper Haunted Village Bottle

Cut-Paper Haunted Village Bottle
Photo via Taller Mimí

Place black paper silhouettes of bats and rooftops against yellow or orange tissue. Arrange them around the bottle before gluing so important shapes aren’t hidden at the back. Set an LED low in the bottle to light the skyline from below. A clear strip behind the tallest roof keeps its outline easy to read.


10. Yellow Flower Above a Green Bottle Stand

Yellow Flower Above a Green Bottle Stand
Photo via craft crazy Genius

Use a broad green base and a short stem so the yellow flower stays steady. Form the petals from lightweight pieces and leave a round, flat spot in the middle for the LED. Test the balance on the table before adding leaves. A shallow flower lets the light show from the side as well as above.


11. Low Lotus Holders With Layered Petals

Low Lotus Holders With Layered Petals
Photo via Detkam Online

Set overlapping petals around a shallow bottle base and stagger the rows so the points alternate. Use frosted plastic or a pale finish if you want the petals to reflect the LED. Leave a generous circle open in the middle so you can take the light out without bending the petals or shifting their positions.


12. Color Patchwork on Tall Clear Bottles

Color Patchwork on Tall Clear Bottles
Photo via HMH Upcycle Art Workshop

Apply a loose patchwork of translucent colors and keep the pieces smaller where the bottle curves. Leave the neck plain so the patchwork has a defined top edge. Try one layer first and switch on the battery string lights. Another layer can deepen the color, though it also makes the glow dimmer in that spot.


13. Mixed-Color Tissue Lanterns From Bottle Offcuts

Mixed-Color Tissue Lanterns From Bottle Offcuts
Photo via Julia Inserro

Use short bottles and leftover bottle sections to make several small lights at once. Wrap each piece in tissue paper and keep an opening wide enough for the battery light. Group the cool colors on one side of the display and the warmer ones on the other, or repeat a single color in every lantern.


14. Ribbed Bottle Lanterns With Colorful Caps

Ribbed Bottle Lanterns With Colorful Caps
Photo via Pinterest tutorial reference

Let the clear middle of each bottle take most of the light. Add matching ribs of colored paper near the top and bottom to frame it. Use a single dark color if you want a simpler version. Make the base removable so you can reach the small battery pack without pulling at the ribs.


15. Round Bottle Lantern With Folded Paper Bands

Round Bottle Lantern With Folded Paper Bands
Photo via craft crazy Genius

Curve several folded bands around the middle to make a round outline. Leave small spaces between the bands so the light can show through. Work around the bottle in pairs on opposite sides to keep the spacing even. A stable base makes it easy to turn the lantern while you adjust the last strips.


16. Glowing Milk Jug Faces

Glowing Milk Jug Faces
Photo via Lights4fun

Draw two eyes and a wide mouth on the smoother side of a translucent jug. Leave the rest of the plastic bare so it spreads the light from a small battery string evenly. Use different expressions when making a pair. Keep the battery box near the opening so switching off the display takes only a moment.


17. Blue Bottle Lantern With Flying Bats

Blue Bottle Lantern With Flying Bats
Photo via The Main Street Mouse

White or pale bat shapes can stand out against a blue LED glow, especially when you leave the areas around them undecorated. Test the shapes on the bottle with removable tape before choosing the final spacing. Try a plain white battery light if you want the bats to stay visible in a brighter room.


18. Jellyfish Light With Clear Bottle Strips

Jellyfish Light With Clear Bottle Strips
Photo via Hunker (project by deryatavas)

Use a rounded bottle top as the body and light clear plastic strips as the tentacles. Keep the strips broad enough to show their curves and smooth every cut edge. A short strand of battery-powered LEDs inside the rounded piece picks out the shape. Put the battery box where it stays accessible after assembly.


Set Up a Small Flameless Light Display

Try the finished lantern in the spot where you plan to display it and check that you can reach its switch. If the cover makes the light too dim, use one layer of tissue paper or leave a clear section near the base. Group bottles of different heights on a level surface, then use these projects to make something with any leftover bottles.

Which bottle shape would you use for a flameless lantern? Share where you would put it and whether you would keep the light warm or add a little color.

 

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.